Welcome to Shanghai Zhanshi Machinery Equipment Co., Ltd.!

Shanghai Zhanshi Machinery Equipment Co., Ltd.

Strength, excellence, professionalism Thick sheet blister manufacturer

phone

021-39874815

138-17814499

Products
Navigation bar

ZS-1815/5 chassis shell plastic forming machine

The equipment is a single-station program-controlled plastic forming machine. It is designed according to the size requirements of your company. The model is ZS-1815/5. The machine features reasonable structure and easy operation. It is suitable for plastic forming of large and medium-sized plastic parts. The electrical control system uses Japan's Omron, high-definition industrial touch display, equipped with intelligent algorithms for temperature control, and the entire……

0.00
0.00
  
产品信息

The equipment is a single-station program-controlled plastic forming machine. It is designed according to the size requirements of your company. The model is ZS-1815/5. The machine features reasonable structure and easy operation. It is suitable for plastic forming of large and medium-sized plastic parts. The electrical control system uses Japan's Omron, high-definition industrial touch display, equipped with intelligent algorithms for temperature control, and the entire……


1. Overview
The equipment is a single-station program-controlled plastic forming machine, designed according to your company's product size requirements,Model is ZS-1815/5The machine features reasonable structure and easy operation, and is suitable for plastic forming of large and medium-sized plastic parts. The electrical control system uses Japan's Omron, high-definition industrial touch display, equipped with intelligent algorithms for temperature control, and the entire system HMI (Human Machine Interface).

2. the process: 
Manual feeding - press box lowering pressure (manual / caution on safety factor) - double heating furnace propulsion heating (automatic) - anti-sag (automatic / optional off) - double heating furnace back (automatic) - Blowing (automatic / optional off) - Lower die table mold rise (automatic) - Vacuum forming (automatic) - Cooling (vacuum with cold air and optional spray) (automatic) - Backflush gas stripping ( Automatic) - Lower die table mold down (automatic) - press frame rise (manual / careful on safety factor) - manual pick-up

3. The main technical parameters(1800mmL×1500mmW×500mmH)

1. Forming area: 1800mm × 1500mm
2, molding height: 500mm
3, the upper furnace power: halogen heating tube 99Kw
    Lower furnace power: halogen heating tube 77Kw
    Vacuum pump power: 3 Kw
    Fan power: 1.1KW × 4 = 4.4Kw
    Lower die table drive motor: 5.50kw
    Upper die table drive motor: 3.00Kw
    Double-burner drive motor: 0.75Kw × 2 = 1.50Kw
4, the total power of the power: 193.4Kw (normal use of power: 20 ~ 150KW)
5, production speed: 2 ~ 7 minutes / piece (2 ~ 6mm)
                                 5 to 10 minutes / piece (5~10mm)
6, compressed air source: 1" (0.6-0.8Mpa)
7, product material thickness: 1.00 ~ 12.00mm
8. Product materials: ABS, PC, PS, PP, PE, PVC, EVA, automotive trim composite materials, etc.
9, the device dimensions: about 4900mm long × 3700mm wide × 4700mm high (for reference)
10, the total weight (without mold): 8.5T (reference)


The following products are produced by this equipment




    


Fully automatic control multi-station positive and negative pressure punching integrated plastic forming machine

phone :  021-39874815

            138-17814499

Product search
support hotline:021-39874815
Fax:021-39874160
E-mail:anna@shzhanshi.com

Add:No. 26, Kangyuan Road, Zhujiajiao Industrial Park, Qingpu District, Shanghai

Contact information
  • ZS-500/700 plastic positive and negative pressure thermoforming machine
  • Three-position positive and negative pressure blister machine
  • ZS-6070 automatic positive and negative pressure blister machine
  • ZS-600/400 plastic thermoforming machine
  • Dental mold equipment ZS-2440 automatic laminating machine
Related products