Welcome to Shanghai Zhanshi Machinery Equipment Co., Ltd.!

Shanghai Zhanshi Machinery Equipment Co., Ltd.

Strength, excellence, professionalism Thick sheet blister manufacturer

phone

021-39874815

138-17814499

Products
Navigation bar

ZS-1816/300 fully enclosed automatic thick sheet plastic forming machine

The machine is a thick plate plastic forming machine. According to the market comprehensive situation, the application size of the largest size 1800*1200*600mm is relatively high. According to the current situation of the customer, we recommend a maximum size of 1800*1200*600. (The size of the length, width and height can be……

0.00
0.00
  
产品信息

The machine is a thick plate plastic forming machine. According to the market comprehensive situation, the application size of the largest size 1800*1200*600mm is relatively high. According to the current situation of the customer, we recommend a maximum size of 1800*1200*600. (The size of the length, width and height can be……


I. Overview
The machine is a fully automatic thick plate plastic forming machine. According to your company's requirements, the maximum size of the equipment is 1800*1600*300 (the size of the length, width and height can be adjusted according to the size of the customer's product). The model is set to ZS-1816/ 300, the device is characterized by reasonable structure and easy operation, and is suitable for forming large blister parts. The electrical control system uses Japan's Omron, high-definition touch control panel, equipped with intelligent algorithms for temperature control, and the entire system human-machine interface (HMI).

2. the process
Automatic feeding of the manipulator---pressing frame lowering pressure material (automatic)--heating furnace automatic reset heating (automatic)---anti-cold (automatic/optional off)----heating furnace back (automatic)- ----Blowing (automatic / selectable off) ----- Lower die table mold rise (automatic) ---- vacuum forming (automatic) ----- cooling (automatic) ----- anti Blowing and demoulding (automatic)-----Lower die table die down (automatic)-----pressing frame rises (automatic)-----manipulator automatically takes material to the engraving machine for trimming-trimming After the completion of the robot, the finished product and the edge material are automatically grabbed to the corresponding positions.

3. the main technical parameters (L1800*W1600*H300)
1. Forming area: 1800×1600mm
2, molding height: 300mm
3, the upper furnace power: halogen heating tube 99Kw
    Lower furnace power: halogen heating tube 77Kw
    Vacuum pump power: 3.00KW-100 cubic meters per hour
    Fan power: 1.1KWX4=4.4Kw upper and lower die table motor 8KW
4, the total power of the power: 191.4Kw (normal use of power: 20-50KW)
5, production speed: 2 ~ 7 minutes / piece (2-4mm)
6, compressed air source: 1" (0.6-0.8Mpa)
7, product material thickness: 1.0-4mm
8. Product materials: ABS, PC, PS, PE, PP, EVA, PVC, HIPS, etc.
9, the device dimensions: about 10800X wide 4900X high 3800mm (final equipment size contract signed after see the plan paper)
10, the total weight (without mold) about: 9T (for reference only)

The following products are produced by this equipment







The video is being produced……

phone :  021-39874815

            138-17814499

Product search
support hotline:021-39874815
Fax:021-39874160
E-mail:anna@shzhanshi.com

Add:No. 26, Kangyuan Road, Zhujiajiao Industrial Park, Qingpu District, Shanghai

Contact information
  • ZS-500/700 plastic positive and negative pressure thermoforming machine
  • Three-position positive and negative pressure blister machine
  • ZS-6070 automatic positive and negative pressure blister machine
  • ZS-600/400 plastic thermoforming machine
  • Dental mold equipment ZS-2440 automatic laminating machine
Related products