Welcome to Shanghai Zhanshi Machinery Equipment Co., Ltd.!

Shanghai Zhanshi Machinery Equipment Co., Ltd.

Strength, excellence, professionalism Thick sheet blister manufacturer

phone

021-39874815

138-17814499

Products
Navigation bar

ZS-1435*830 PS foam laminating machine

The machine is a single-station program-controlled PS foam laminating machine, and the application size of the working surface is 1435*830mm. The application frequency is relatively high. According to the current situation of the customer, we recommend a molding size of 1435*830mm (length, width and height). The size can be adjusted according to the size of the customer's product.) The model is set to ZS-1435……

560000.00
560000.00
  
产品信息

The machine is a single-station program-controlled PS foam laminating machine, and the application size of the working surface is 1435*830mm. The application frequency is relatively high. According to the current situation of the customer, we recommend a molding size of 1435*830mm (length, width and height). The size can be adjusted according to the size of the customer's product.) The model is set to ZS-1435……


I. Overview
Single-station program contro PS foam laminating machineThe working frequency of the working table is 1435*830mm. The application frequency is relatively high. According to the current situation of the customer, we recommend a molding size of 1435*830mm (the size of the length, width and height can be adjusted according to the size of the customer's product). The model is set to ZS. -1435, the device features reasonable structure and easy operation, and is suitable for the film forming process of the floor heating module. The electrical control system uses Japan's Omron, high-definition touch control panel, equipped with intelligent algorithms for temperature control, and the entire system human-machine interface (HMI).

2. the process
Automatic feeding - foam board slides into the forming station - automatic drawing - bottom mold rise - press frame down vacuum once - heating furnace moves in to the baking sheet, heating time to - automatic furnace - automatic vacuum forming - molded product is pulled Discharge area, automatic cutting.

3.The main technical parameters (L1435*W830*H100mm)
1. Forming area: 1435×830mm; minimum adjustable to 800*500mm
2, molding height: 100mm
3, heating power: far infrared ceramic heating radiator 52KW
      Vacuum pump power: 3.00KW-100 cubic meters
      Fan power: 0.37*4Kw =1.48KW
4, the total power of the power: 57Kw (normal use power: 20-50KW)
5, production speed: 2 ~ 7 minutes / piece (2-4mm)
6, compressed air source: 1" (0.6-0.8Mpa)
7, product material thickness: 1.0-14mm
8, product materials: PS
9, equipment dimensions: length 7200X width 2650X height 4500MM (for reference, based on actual size)
10, the total weight (without mold): 8.5T (reference)

The following products are produced by this equipment







The video is being produced……

phone :  021-39874815

            138-17814499

Product search
support hotline:021-39874815
Fax:021-39874160
E-mail:anna@shzhanshi.com

Add:No. 26, Kangyuan Road, Zhujiajiao Industrial Park, Qingpu District, Shanghai

Contact information
  • ZS-500/700 plastic positive and negative pressure thermoforming machine
  • Three-position positive and negative pressure blister machine
  • ZS-6070 automatic positive and negative pressure blister machine
  • ZS-600/400 plastic thermoforming machine
  • Dental mold equipment ZS-2440 automatic laminating machine
Related products